Viewing Issues 951 - 1000 / 1238

    PIDReporterCategorySeverityStatusResolutionTarget VersionUpdated SummaryTest case number
  00255879Vico Liang
[Community]  OCCT:Mesh
just a question
assigned (oan)
no change requiredUnscheduled2020-08-28Mesh - Meshing algorithm doesn't consider isolated vertices inside face.
  00255867Istvan Csanady
[Community]  OCCT:Mesh
minor
feedback (abv)
openUnscheduled2020-08-28Mesh - Poor mesh quality, or failure of meshing for closed extruded surfaces with holesbugs mesh bug25586_1, bug25586_2, bug25586_3
  00235814Roman Lygin
[Community]  OCCT:Mesh
minor
feedback (abv)
openUnscheduled2020-08-28[Regression] Performance of BRepMesh 6.5.4 can be up to Nx worse than 6.3.1
  00217771skl
[Open CASCADE]  OCCT:Mesh
trivial
feedback (oan)
openUnscheduled2020-08-28Invalid result after perform "incmesh"
  002722610ifv
[Open CASCADE]  OCCT:Mesh
minor
assigned (oan)
openUnscheduled2020-08-28Mesh - Meshing algorithm fails if edge curves has small defects (bends, loops...)
  0031474 emv
[Open CASCADE]  OCCT:Mesh
minor
new (oan)
openUnscheduled2020-08-28Mesh - Return status Reused for the shapes without geometry
  0031475 emv
[Open CASCADE]  OCCT:Mesh
feature
new (oan)
openUnscheduled2020-08-28Mesh - Extend BRepMesh to work on the shapes without geometry
  0028087 jma
[Open CASCADE]  OCCT:Samples
feature
new (bugmaster)
openUnscheduled2020-08-25OCCT Samples RedesignNot required
  0031724 abezotosniy
[Community]  OCCT:Modeling Algorithms
minor
new (msv)
open2020-08-20Sweep produces a result that is inconsistent according to the input spine
  0031723 abezotosniy
[Community]  OCCT:Modeling Algorithms
minor
new (msv)
open2020-08-20After slight displacement of the profile, the sweep produce incorrect result.
  0031708 Anton Morozov
[Community]  OCCT:Modeling Algorithms
major
new (msv)
open2020-08-11HLRBRep_Algo hangs on certain models and produces out-of-bounds lines
  00219732szy
[Open CASCADE]  OCCT:Application Framework
feature
acknowledged (mpv)
openUnscheduled2020-08-10TDocStd_Document size evaluation
  0031130 hwliu11
[Community]  OCCT:Foundation Classes
minor
new (abv)
open2020-08-03Foundation Classes - Expr_NamedUnknown get wrong Derivative
  0031696 vengelgardt
[Community]  OCCT:Modeling Algorithms
crash
new (msv)
open2020-08-03Crash on attempt to unify same domain
  0031695 galbramc
[Community]  OCCT:Shape Healing
feature
new (gka)
open2020-07-31Add AvoidVertexes to BRepLib_FuseEdges [OCCT] 7.4.0
  00314213szy
[Open CASCADE]  OCCT:Mesh
minor
feedback (szy)
suspendedUnscheduled2020-07-23OCCT:Mesh: SelfIntersectingWire Failure.
  0031679 vengelgardt
[Community]  OCCT:Modeling Algorithms
major
new (msv)
open2020-07-21Sweep generates self-intersected solid for trivial 1 degree profile
  0031669 abezotosniy
[Community]  OCCT:Modeling Algorithms
minor
new (msv)
open2020-07-16Crash while using BRepOffsetAPI_MakePipeShell
  0030961 wandererfan
[Community]  OCCT:Modeling Algorithms
block
new (msv)
open2020-07-04HLRBRep_Algo/HLRBRep_HLRToShape return empty compound
  0031577 PrzemoF
[Community]  OCCT:DRAW
crash
new (abv)
open2020-06-29Draw Harness - Inconsistent crash when test file is passed via -f
  00280861jma
[Open CASCADE]  OCCT:DRAW
feature
new (bugmaster)
openUnscheduled2020-06-25Improve Usability of DrawNot required
  0031612 mat127
[Community]  OCCT:Modeling Algorithms
major
new (msv)
open2020-06-16BRepOffsetAPI_MakeOffset incorrect result
  0031605 aothms
[Community]  OCCT:Foundation Classes
minor
new (abv)
open2020-06-10gp_GTrsf::SetVectorialPart sets scale to 0.0 causing non-invertable matrix
  0031567 ventu
[Community]  OCCT:Data Exchange
major
new (gka)
open2020-06-04Data Exchange - Imported STeP model is missing two surfaces
  0031593 jensgw
[Community]  OCCT:Modeling Algorithms
crash
new (msv)
open2020-06-02BRepOffsetAPI_ThruSections crashes with two wires
  0031592 jensgw
[Community]  OCCT:Modeling Algorithms
crash
new (msv)
open2020-06-02BRepOffsetAPI_MakePipe and BRepOffsetAPI_MakePipeShell crash
  0031591 jensgw
[Community]  OCCT:Modeling Algorithms
major
new (msv)
open2020-06-02GeomAPI_Interpolate resulting curve overoscilates when tangents are applied
  0031569 Oliver R
[Community]  OCCT:DRAW
minor
new (abv)
open2020-05-18DRAW Exception after meshing bcut solids
  0031522 blobfish
[Community]  OCCT:Modeling Algorithms
minor
new (msv)
open2020-05-08Modeling Algorithms - bopargcheck fails with extruded bezier
  0031553 alexzkw
[Community]  OCCT:Modeling Data
minor
new (msv)
open2020-05-08Modeling Data - Geom_Surface value() returns invalid point - NaN
  0031545 Alexandru
[Community]  OCCT:Data Exchange
major
new (gka)
open2020-04-30Volume part is considered empty by OC
  00312178denix56
[Community]  OCCT:Modeling Algorithms
crash
assigned (akaftasev)
open2020-04-16Modeling Algorithms - Exception is raised in GeomFill_SectionPlacement when parallel path and section
  0031493 alexzkw
[Community]  OCCT:Modeling Data
minor
new (msv)
open2020-04-09GCPnts_AbscissaPoint and CPnts_AbscissaPoint do not work properly for abscissa values larger than the curve length
  00314632alexzkw
[Community]  OCCT:Modeling Algorithms
major
new (emv)
open2020-03-25Intersection curve is displaced
  0031447 likewei92
[Community]  OCCT:Modeling Algorithms
minor
new (msv)
open2020-03-20BRepOffsetAPI_MakeOffsetShape breaks
  00314361msv
[Open CASCADE]  OCCT:Modeling Data
minor
new (msv)
open2020-03-18Modeling Data - try to make the base surface C1 when creating offset surface
  00050811mkk
[Open CASCADE]  OCCT:Modeling Algorithms
trivial
assigned (msv)
suspended2020-03-04Modeling Algorithms - BRepOffset_MakeOffsetShape algorithm does not return valid result.bugs modalg_7 bug5081_1, bug5081_2
  00005921mkk
[Open CASCADE]  OCCT:Modeling Algorithms
trivial
assigned (msv)
suspended2020-03-04Modeling Algorithms - BRepCheck_Analyzer does not detect faulty shapebugs moddata_2 bug592
  0031090 Mechanicoder
[Community]  OCCT:Modeling Algorithms
minor
assigned (msv)
open2020-03-03Modeling Algorithms - BRepExtrema_DistShapeShape gives wrong result between two faces
  00312902b_walter
[Community]  OCCT:Modeling Algorithms
minor
new (msv)
open2020-01-15Modeling Algorithms - Center of mass of the TopoDS_Edge of an ellipse seems to be wrong
  00304543galbramc
[Community]  OCCT:Modeling Algorithms
major
new (abv)
open2019-12-17Modeling Algorithms - BRepBuilderAPI_Sewing fails after BRepAlgoAPI_Fuse
  00239421Roman Lygin
[Community]  OCCT:Modeling Algorithms
minor
new (jgv)
open2019-12-17Modeling Algorithms - Pipe algorithms unrobust to number roundingbugs modalg_7 bug23942
  00312491Aaron Michalk
[Community]  OCCT:Modeling Algorithms
crash
new (msv)
open2019-12-17Modeling Algorithms - Invalid memory access with parallel lines and GeomAPI_ExtremaCurveCurve
  0031229 galbramc
[Community]  OCCT:Modeling Algorithms
major
new (msv)
open2019-12-17Modeling Algorithms - BRepFilletAPI_MakeFillet works and fails with equivalent (not equal) shapes in OCC 7.4
  0031177 Mechanicoder
[Community]  OCCT:Modeling Algorithms
major
new (msv)
open2019-12-17Modeling Algorithms - BRepExtrema_DistShapeShape gives wrong result between edge-face
  00311141FrancoisLauzon
[Community]  OCCT:Modeling Algorithms
crash
new (msv)
open2019-12-17Modeling Algorithms - BRepExtrema_ExtCF crash
  0031064 galbramc
[Community]  OCCT:Modeling Algorithms
major
new (msv)
open2019-12-17Modeling Algorithms - Fillet and Chamfer produce incorrect strange geometry with OCCT 7.4 and older
  00225921szy
[Community]  OCCT:Data Exchange
feature
assigned (gka)
reopened2019-12-17Data Exchange - Corrected processing of parameter read.iges.bspline.continuity
  00312481blobfish
[Community]  OCCT:Shape Healing
block
new (abv)
open2019-12-17Shape Healing - ShapeAnalysis::OuterWire() returns empty outer wire for attached use case
  00225663szy
[Community]  OCCT:Data Exchange
trivial
assigned (gka)
reopened2019-12-17Data Exchange - Iges import issuebugs iges bug22566