View Issue Details

IDProjectCategoryView StatusLast Update
0032557CommunityOCCT:Modeling Algorithmspublic2021-12-30 15:09
Reporterlrineau Assigned Toifv 
PrioritynormalSeveritymajor 
Status closedResolutionreopened 
PlatformLinuxOSDebian 6.0 
Product Version7.5.0 
Target Version7.7.0Fixed in Version7.6.0 
Summary0032557: Modeling Data - Use of BRepBuilderAPI_NurbsConvert create 2d p-curves with errors
DescriptionWith the given STEP file `abc_0_31-mod.step` given in the attached zip file, the code `debug_issue.cpp` (also in the zip file) shows that the conversion to NURBS using `BRepBuilderAPI_NurbsConvert` create an incorrect wire, with 2d p-curve accumulating so much imprecision that the end points of the loop of p-curve in the wire no longer coincide.

Given the data set, the incriminated wire the one of the third face. I will attach screenshots...

The attached .cpp file loops on the edges of the wire, and displays the maximal distance between two endpoints (of p-curves) that should coincide. That process is run before and after the conversion to NURBS.
Steps To ReproduceTest case
bugs/moddata_3/bug32557
TagsNo tags attached.
Test case numberbugs/moddata_3/bug32557

Attached Files

  • debug_issue.zip (15,645 bytes)
  • abc_31_third_face.png (43,187 bytes)
  • wire.png (4,643 bytes)
  • wire-nurbs.png (4,573 bytes)
  • wire-nurbs-zoom.png (1,699 bytes)
  • bug32557.brep (19,981 bytes)
  • debug_issue_bis.zip (25,175 bytes)
  • abc_0_709.step (8,751 bytes)
  • abc_0_1225.step (19,381 bytes)
  • abc_0_492.step (60,279 bytes)
  • abc_0_685.step (34,757 bytes)
  • abc_0_710.step (31,610 bytes)
  • abc_0_1005.step (66,461 bytes)
  • abc_0_1062.step (97,469 bytes)
  • bug32557_1.brep (1,715 bytes)
  • bug32557_2.brep (37,593 bytes)

Relationships

related to 0032454 assignedifv Community Use of BRepBuilderAPI_NurbsConvert create self intersecting 2d curves 

Activities

lrineau

2021-09-02 18:08

reporter  

debug_issue.zip (15,645 bytes)

lrineau

2021-09-02 18:08

reporter  

abc_31_third_face.png (43,187 bytes)

lrineau

2021-09-02 18:12

reporter  

wire.png (4,643 bytes)

lrineau

2021-09-02 18:12

reporter  

wire-nurbs.png (4,573 bytes)

lrineau

2021-09-02 18:12

reporter  

wire-nurbs-zoom.png (1,699 bytes)

lrineau

2021-09-02 18:14

reporter   ~0103686

I have upload a general view of the STEP face that has the incorrect wire (after the conversion to NURBS).

I have also uploaded a drawing of the wire, in the 2d parametric space, before and after the conversion to NURBS, as well as a zoom on the problematic zone.

lrineau

2021-09-02 18:18

reporter   ~0103688

This bug occurs with OCCT version 7.5.0 (as shipped by Linux Fedora 34), and with the master branch of OCCT (commit dated Sun Jun 27 20:13:49 2021 +0300).

The bug was not present in OCCT version 7.4.0. That version 7.4.0 was ship in Linux Fedora 32, and I recompiled it locally to check again, just before the submission of this issue.

lrineau

2021-09-23 16:12

reporter   ~0104319

Hi, It seems this buggy behaviour has been introduced in OCCT 7.5.0 by the commit

> commit bdd09cfaf4fe4d7643d0c1c3d1d4cf9e8037a32a
> Author: ifv <ifv@opencascade.com>
> Date: Wed Dec 18 13:53:11 2019 +0300
>
> 0031242: Scaling with different coefficients along axes produces invalid shape
>
> GeomConvert_1.cxx:
> Creation periodic BSpline surfaces from trimmed periodic surface if trim is boundaries of periodic domain is allowed
>
> BRepTools_NurbsConvertModification.cxx:
> Checking domain of 2dCurves if surfaces are periodic is added
>
> Test case tests/bugs/mesh/bug30008_2 is modified according to current behavior
>
> Test case tests/bugs/modalg_7/bug31242 is added

It seems to be a regression.

I can for now go back to OCCT 7.4.0, as a workaround.

What are your intention for that bug? Will your revert commit bdd09cfaf4fe4d7643d0c1c3d1d4cf9e8037a32a (0031242) in future OpenCASCADE releases?

lrineau

2021-09-23 16:13

reporter   ~0104320

Here is a Github link to the culprit commit: https://github.com/Open-Cascade-SAS/OCCT/commit/bdd09cfaf4fe4d7643d0c1c3d1d4cf9e8037a32a.

kgv

2021-09-23 16:21

developer   ~0104321

@lrineau, thanks for preliminary analysis, the bug #0031242 has been linked to this one (it is inaccessible to public, but there is nothing interesting in description).
> Hi, It seems this buggy behaviour has been introduced in OCCT 7.5.0 by the commit

lrineau

2021-09-23 16:25

reporter   ~0104322

Hi @kvg, that is interesting to now that commit bdd09cfaf4fe4d7643d0c1c3d1d4cf9e8037a32a was actually a fix for an existing bug. It means you cannot easily revert the commit, because the bug #0031242 (whatever it is) would reappear.

msv

2021-09-23 22:35

developer   ~0104325

Dear Igor, could you see if this regression can be fixed by the next release?

ifv

2021-09-24 15:12

developer   ~0104330

Debugging

ifv

2021-09-24 15:13

developer   ~0104331

This problem can be fixed by next release

ifv

2021-09-24 15:48

developer  

bug32557.brep (19,981 bytes)

git

2021-09-24 16:25

administrator   ~0104334

Branch CR32557 has been created by ifv.

SHA-1: 612beace39c5bc349761dc4dbbb3cf7a3795b644


Detailed log of new commits:

Author: ifv
Date: Fri Sep 24 16:24:34 2021 +0300

    0032557: Modeling Data - Use of BRepBuilderAPI_NurbsConvert create 2d p-curves with errors
    
    BRepTools/BRepTools_NurbsConvertModification.cxx -
     Checking domain of 2dCurves if surfaces are periodic is improved
    
    tests/bugs/moddata_3/bug32557 - test case added

git

2021-09-27 10:22

administrator   ~0104385

Branch CR32557 has been updated forcibly by ifv.

SHA-1: 16578705170e25be3ca2f8e35bb8f805dc6f0439

lrineau

2021-09-27 11:22

reporter   ~0104389

I confirm branch CR32557 fixes the bug in my setup. Thanks for the fix.

ifv

2021-09-27 12:40

developer   ~0104394

Branch 32557 is ready for review

Branches for integration
OCCT - CR32557
Products - not

msv

2021-09-27 19:45

developer   ~0104409

Igor, could you test if it fixes also the linked bug 0032454?

lrineau

2021-09-29 11:19

reporter  

debug_issue_bis.zip (25,175 bytes)

lrineau

2021-09-29 11:22

reporter   ~0104424

Hi,

Even if branch `CR32557` fixes most of my test cases, I found one for which there is still a distance between 2d curves once converted in NURBS. See the attached file `debug_issue_bis.zip`, with the data set `abc_0_522.step` from the public ABC repository. This time, the file debug_issue.cpp uses `ShapeAnalysis_WireOrder` to find the maximal distance between edges of the wire, because the wire is not correctly ordered in the file.

@ifv It looks like the same bug, right?

smoskvin

2021-10-02 10:34

administrator   ~0104479

Combination -
OCCT branch : IR-2021-10-01
master SHA - 0f05f21194a6711251182a118643efc9eb6c322b
49e51745631c52b6c452c65adae4d6dfa21a1b1e
Products branch : IR-2021-10-01 SHA - a7a409985492330e4f25011465bc659dfe7d7562
was compiled on Linux, MacOS and Windows platforms and tested in optimize mode.

Number of compiler warnings:
No new/fixed warnings

Regressions/Differences/Improvements:
No regressions/differences

CPU differences:
Debian80-64:
OCCT
Total CPU difference: 17464.590000000462 / 17476.150000000354 [-0.07%]
Products
Total CPU difference: 11405.930000000111 / 11390.180000000097 [+0.14%]
Windows-64-VC14:
OCCT
Total CPU difference: 19332.171875 / 19335.34375 [-0.02%]
Products
Total CPU difference: 12772.859375 / 12782.828125 [-0.08%]


Image differences :
No differences that require special attention

Memory differences :
No differences that require special attention

git

2021-10-04 14:52

administrator   ~0104502

Branch CR32557_1 has been created by ifv.

SHA-1: 30a611a6005bf850b31d7ec330c4368dfc589f81


Detailed log of new commits:

Author: ifv
Date: Mon Oct 4 14:48:03 2021 +0300

    CheckAndSegment added

git

2021-10-04 15:02

administrator   ~0104503

Branch CR32557_1 has been updated forcibly by ifv.

SHA-1: b54f34fa1d291349a8c1d246c0474d409ece9f9d

ifv

2021-10-08 11:07

developer   ~0104541

Issue is reopen because of new problem provided by @Irineau, see note #104424

lrineau

2021-10-12 15:13

reporter  

abc_0_709.step (8,751 bytes)

lrineau

2021-10-12 15:13

reporter  

abc_0_1225.step (19,381 bytes)

lrineau

2021-10-12 15:17

reporter   ~0104610

The branch CR32557_1 does fix the issue with the file abc_0_522.step,
but there are other files from the ABC repository that got worst with
the new commits from CR32557_1, compared to CR32557.

I have attached two new files:

  abc_0_709.step
  abc_0_1225.step

With those two files, and a lot of other from the ABC repository, now I have an exception raised:

  terminate called after throwing an instance of 'Standard_ConstructionError'

Here is the relevant backtrace:

#5 0x00007ffff61a75a9 in __cxa_throw () from /lib64/libstdc++.so.6
#6 0x00007fff402977f5 in CheckSurfaceData (SPoles=..., SUKnots=..., SVKnots=..., SUMults=..., SVMults=..., UDegree=2,
    VDegree=1, UPeriodic=<optimized out>, VPeriodic=<optimized out>)
    at OCCT/src/Geom/Geom_BSplineSurface.cxx:85
0000007 0x00007fff40297d8f in Geom_BSplineSurface::Geom_BSplineSurface (this=0x6e5c680, this@entry=0x1, Poles=..., Weights=...,
    UKnots=..., VKnots=..., UMults=..., VMults=..., UDegree=<optimized out>, VDegree=<optimized out>,
    UPeriodic=<optimized out>, VPeriodic=<optimized out>)
    at OCCT/src/Geom/Geom_BSplineSurface.cxx:259
0000008 0x00007fff402970bf in Geom_BSplineSurface::Copy (this=<optimized out>)
    at OCCT/src/Geom/Geom_BSplineSurface.cxx:140
0000009 0x00007fff402c1b0b in GeomAdaptor::MakeSurface (HS=..., theTrimFlag=false)
    at OCCT/src/GeomAdaptor/GeomAdaptor.cxx:134
#10 0x00007fff40474356 in computePeriodicity (theSurf=..., theUPeriod=@0x7fffffffb878: 0, theVPeriod=@0x7fffffffb870: 0)
    at OCCT/src/ProjLib/ProjLib_ComputeApproxOnPolarSurface.cxx:119
0000011 0x00007fff4046f1e5 in ProjLib_ComputeApproxOnPolarSurface::BuildInitialCurve2d (this=this@entry=0x7fffffffc730, Curve=...,
    Surf=...) at OCCT/src/ProjLib/ProjLib_ComputeApproxOnPolarSurface.cxx:932
#12 0x00007fff4046e202 in ProjLib_ComputeApproxOnPolarSurface::Perform (this=this@entry=0x7fffffffc730, InitialCurve2d=...,
    Curve=..., S=...) at OCCT/src/ProjLib/ProjLib_ComputeApproxOnPolarSurface.cxx:794
0000013 0x00007fff4046d8db in ProjLib_ComputeApproxOnPolarSurface::ProjLib_ComputeApproxOnPolarSurface (this=0x7fffffffc730,
    theInitialCurve2d=..., theCurve=..., theSurface=..., theTolerance3D=<optimized out>)
    at OCCT/src/ProjLib/ProjLib_ComputeApproxOnPolarSurface.cxx:517
0000014 0x00007fff408c8a03 in BRepTools_NurbsConvertModification::NewCurve2d (this=0x6d86a60, E=..., F=..., newE=..., newF=...,
    Curve2d=..., Tol=@0x7fffffffc940: 9.9999999999999995e-08)
    at OCCT/src/BRepTools/BRepTools_NurbsConvertModification.cxx:488
0000015 0x00007fff408c4188 in BRepTools_Modifier::Rebuild (this=<optimized out>, this@entry=0x7fffffffd310, S=..., M=...,
    theNewGeom=<optimized out>, theProgress=...)
    at OCCT/src/BRepTools/BRepTools_Modifier.cxx:410
0000016 0x00007fff408c3df2 in BRepTools_Modifier::Rebuild (this=<optimized out>, this@entry=0x7fffffffd310, S=..., M=...,
    theNewGeom=<optimized out>, theProgress=...)
    at OCCT/src/BRepTools/BRepTools_Modifier.cxx:363
0000017 0x00007fff408c3df2 in BRepTools_Modifier::Rebuild (this=<optimized out>, this@entry=0x7fffffffd310, S=..., M=...,
    theNewGeom=<optimized out>, theProgress=...)
    at OCCT/src/BRepTools/BRepTools_Modifier.cxx:363
0000018 0x00007fff408c29a4 in BRepTools_Modifier::Perform (this=0x7fffffffd310, M=..., theProgress=...)
    at OCCT/src/BRepTools/BRepTools_Modifier.cxx:147
0000019 0x00007fff41040243 in BRepBuilderAPI_ModifyShape::DoModif (this=this@entry=0x7fffffffd2c0)
    at OCCT/src/BRepBuilderAPI/BRepBuilderAPI_ModifyShape.cxx:77
0000020 0x00007fff410403ad in BRepBuilderAPI_ModifyShape::DoModif (this=0x7fffffffd2c0, S=..., M=...)
    at OCCT/src/BRepBuilderAPI/BRepBuilderAPI_ModifyShape.cxx:126
0000021 0x00007fff41040701 in BRepBuilderAPI_NurbsConvert::Perform (this=this@entry=0x7fffffffd2c0, S=...)
    at OCCT/src/BRepBuilderAPI/BRepBuilderAPI_NurbsConvert.cxx:63
0000022 0x00007fff41040682 in BRepBuilderAPI_NurbsConvert::BRepBuilderAPI_NurbsConvert (this=0x7fffffffd2c0, S=...,
    Copy=<optimized out>) at OCCT/src/BRepBuilderAPI/BRepBuilderAPI_NurbsConvert.cxx:50

git

2021-10-20 14:59

administrator   ~0104763

Branch CR32557_1 has been updated forcibly by ifv.

SHA-1: 7ae1f65ec6d779b5236575f6f9aaddce132626c7

ifv

2021-10-21 15:04

developer   ~0104781

Dear @Irineau, could you please test new variant of branch CR32557_1 on your data repository?

lrineau

2021-10-22 19:03

reporter  

abc_0_492.step (60,279 bytes)

lrineau

2021-10-22 19:04

reporter  

abc_0_685.step (34,757 bytes)

lrineau

2021-10-22 19:04

reporter  

abc_0_710.step (31,610 bytes)

lrineau

2021-10-22 19:04

reporter  

abc_0_1005.step (66,461 bytes)

lrineau

2021-10-22 19:04

reporter  

abc_0_1062.step (97,469 bytes)

lrineau

2021-10-22 19:06

reporter   ~0104802

Hi @ifv, I have added a few test cases that fail similarly, on the last commit 7ae1f65ec6d779b5236575f6f9aaddce132626c7:

abc_0_1005.step
abc_0_1062.step
abc_0_492.step
abc_0_685.step
abc_0_710.step

lrineau

2021-10-22 19:13

reporter   ~0104803

Actually, the call stack is not always the same, and the exception thrown is also different:

           name status time error
abc_0_1062.step FAILED 3.05515 terminate called after throwing an instance of 'Standard_ConstructionError'
 abc_0_492.step FAILED 3.04846 terminate called after throwing an instance of 'Standard_ConstructionError'
 abc_0_685.step FAILED 3.00421 terminate called after throwing an instance of 'Standard_ConstructionError'
abc_0_1005.step FAILED 3.03978 terminate called after throwing an instance of 'Standard_RangeError'
 abc_0_710.step FAILED 3.02421 terminate called after throwing an instance of 'Standard_RangeError'

but that seems to be always somewhere in a call to `BRepBuilderAPI_NurbsConvert::Perform`.

git

2021-10-24 10:23

administrator   ~0104827

Branch CR32557_1 has been deleted by mnt.

SHA-1: 7ae1f65ec6d779b5236575f6f9aaddce132626c7

ifv

2021-10-25 11:00

developer  

bug32557_1.brep (1,715 bytes)

ifv

2021-10-25 11:01

developer  

bug32557_2.brep (37,593 bytes)

git

2021-10-25 11:18

administrator   ~0104850

Branch CR32557_1 has been created by ifv.

SHA-1: 9923f0870387be558e462998f98172b172a659a4


Detailed log of new commits:

Author: ifv
Date: Mon Oct 4 14:48:03 2021 +0300

    0032557: Modeling Data - Use of BRepBuilderAPI_NurbsConvert create 2d p-curves with gaps
    
    GeomConvert/GeomConvert_1.cxx - method CheckAndSegment is added to adjust surface periodic boundaries
    bug32557 - test is updated by new cases

ifv

2021-10-26 14:08

developer   ~0104876

Branch CR32557_1 is ready for review

Branches for integration:
OCCT - CR32557_1
Products - not

Patch seems to fix issue 0032454
Test results:

http://jenkins-test-occt.nnov.opencascade.com/view/CR32557_1-master-ifv/view/COMPARE/

msv

2021-10-26 17:30

developer   ~0104883

What is about the difference in images?
IMAGE bugs modalg_7 bug31242: bug31242.png differs

ifv

2021-10-26 17:58

developer   ~0104884

In my opinion, reason of image differences for bugs modalg_7 bug31242 is any problem in isoline builder. Really result of CR32557_1 is better than result of master, for example tolerances are:
CR32557_1
## Tolerances on the shape result (nbFaces:1 nbEdges:4 nbVtx:4)

    Face : Min 1.00000e-07 Max 1.00000e-07

    Edge : Min 3.22903e-07 Max 8.73714e-02

    Vertex : Min 5.00000e-06 Max 8.73714e-02

master
## Tolerances on the shape result (nbFaces:1 nbEdges:4 nbVtx:4)

    Face : Min 1.00000e-07 Max 1.00000e-07

    Edge : Min 4.48635e-06 Max 2.12449e-01

    Vertex : Min 9.94636e-02 Max 2.12449e-01

Surfaces are the same, pcurves are differ a bit

msv

2021-10-26 18:37

developer   ~0104885

Branches for integration:
OCCT - CR32557_1
Products - not

ifv

2021-10-28 10:27

developer   ~0104930

Debugging

smoskvin

2021-10-30 11:21

administrator   ~0104978

Combination -
OCCT branch : OCCT-760
master SHA - 0d186a91c07a6217cd132ec7ea03f1e6f7a2a9ce
49e51745631c52b6c452c65adae4d6dfa21a1b1e
Products branch : OCCT-760 SHA - c472aa8da77ba932a88c890c58c81b09f9ae00b5
was compiled on Linux, MacOS and Windows platforms and tested in optimize mode.

Number of compiler warnings:
No new/fixed warnings

Regressions/Differences/Improvements:
No regressions/differences

CPU differences:
Debian80-64:
OCCT
Total CPU difference: 17728.310000000427 / 17750.15000000046 [-0.12%]
Products
Total CPU difference: 11578.090000000113 / 11624.980000000118 [-0.40%]
Windows-64-VC14:
OCCT
Total CPU difference: 19746.84375 / 19683.796875 [+0.32%]
Products
Total CPU difference: 12740.0 / 10994.3125 [+15.88%]


Image differences :
No differences that require special attention

Memory differences :
No differences that require special attention

git

2021-11-02 21:09

administrator   ~0105021

Branch CR32557 has been deleted by mnt.

SHA-1: 16578705170e25be3ca2f8e35bb8f805dc6f0439

git

2021-11-02 21:09

administrator   ~0105022

Branch CR32557_1 has been deleted by mnt.

SHA-1: 9923f0870387be558e462998f98172b172a659a4

Related Changesets

occt: master f277dcbb

2021-09-24 13:24:34

ifv


Committer: smoskvin Details Diff
0032557: Modeling Data - Use of BRepBuilderAPI_NurbsConvert create 2d p-curves with errors

BRepTools/BRepTools_NurbsConvertModification.cxx -
Checking domain of 2dCurves if surfaces are periodic is improved

tests/bugs/moddata_3/bug32557 - test case added
Affected Issues
0032557
mod - src/BRepTools/BRepTools_NurbsConvertModification.cxx Diff File
mod - tests/bugs/mesh/bug30008_2 Diff File
add - tests/bugs/moddata_3/bug32557 Diff File

occt: master 9923f087

2021-10-04 11:48:03

ifv

Details Diff
0032557: Modeling Data - Use of BRepBuilderAPI_NurbsConvert create 2d p-curves with gaps

GeomConvert/GeomConvert_1.cxx - method CheckAndSegment is added to adjust surface periodic boundaries
bug32557 - test is updated by new cases
Affected Issues
0032557
mod - src/BRepTools/BRepTools_NurbsConvertModification.cxx Diff File
mod - src/GeomConvert/GeomConvert_1.cxx Diff File
mod - tests/bugs/moddata_3/bug32557 Diff File

Issue History

Date Modified Username Field Change
2021-09-02 18:08 lrineau New Issue
2021-09-02 18:08 lrineau Assigned To => msv
2021-09-02 18:08 lrineau File Added: debug_issue.zip
2021-09-02 18:08 lrineau File Added: abc_31_third_face.png
2021-09-02 18:12 lrineau File Added: wire.png
2021-09-02 18:12 lrineau File Added: wire-nurbs.png
2021-09-02 18:12 lrineau File Added: wire-nurbs-zoom.png
2021-09-02 18:14 lrineau Note Added: 0103686
2021-09-02 18:18 lrineau Note Added: 0103688
2021-09-02 18:26 kgv Product Version 7.5.3 => 7.5.0
2021-09-23 16:12 lrineau Note Added: 0104319
2021-09-23 16:13 lrineau Note Added: 0104320
2021-09-23 16:21 kgv Note Added: 0104321
2021-09-23 16:25 lrineau Note Added: 0104322
2021-09-23 22:35 msv Note Added: 0104325
2021-09-23 22:35 msv Assigned To msv => ifv
2021-09-24 15:12 ifv Note Added: 0104330
2021-09-24 15:13 ifv Note Added: 0104331
2021-09-24 15:16 ifv Status new => assigned
2021-09-24 15:16 ifv Summary Use of BRepBuilderAPI_NurbsConvert create 2d p-curves with errors => Modeling Data - Use of BRepBuilderAPI_NurbsConvert create 2d p-curves with errors
2021-09-24 15:48 ifv File Added: bug32557.brep
2021-09-24 16:25 git Note Added: 0104334
2021-09-27 09:59 kgv Target Version => 7.6.0
2021-09-27 10:22 git Note Added: 0104385
2021-09-27 11:22 lrineau Note Added: 0104389
2021-09-27 12:37 ifv Test case number => bugs/moddata_3/bug32557
2021-09-27 12:37 ifv Steps to Reproduce Updated
2021-09-27 12:40 ifv Note Added: 0104394
2021-09-27 12:40 ifv Assigned To ifv => msv
2021-09-27 12:40 ifv Status assigned => resolved
2021-09-27 14:11 msv Assigned To msv => bugmaster
2021-09-27 14:11 msv Status resolved => reviewed
2021-09-27 19:44 msv Relationship added related to 0032454
2021-09-27 19:45 msv Note Added: 0104409
2021-09-29 11:19 lrineau File Added: debug_issue_bis.zip
2021-09-29 11:22 lrineau Note Added: 0104424
2021-09-29 16:07 kgv Relationship added related to 0032596
2021-09-29 16:07 kgv Relationship deleted related to 0032596
2021-10-02 10:34 smoskvin Note Added: 0104479
2021-10-02 10:34 smoskvin Status reviewed => tested
2021-10-02 11:32 smoskvin Changeset attached => occt master f277dcbb
2021-10-02 11:32 smoskvin Assigned To bugmaster => smoskvin
2021-10-02 11:32 smoskvin Status tested => verified
2021-10-02 11:32 smoskvin Resolution open => fixed
2021-10-04 14:52 git Note Added: 0104502
2021-10-04 15:02 git Note Added: 0104503
2021-10-08 11:07 ifv Assigned To smoskvin => ifv
2021-10-08 11:07 ifv Note Added: 0104541
2021-10-08 11:07 ifv Status verified => feedback
2021-10-08 11:07 ifv Resolution fixed => reopened
2021-10-08 11:09 ifv Status feedback => assigned
2021-10-12 15:13 lrineau File Added: abc_0_709.step
2021-10-12 15:13 lrineau File Added: abc_0_1225.step
2021-10-12 15:17 lrineau Note Added: 0104610
2021-10-20 14:59 git Note Added: 0104763
2021-10-21 15:04 ifv Note Added: 0104781
2021-10-22 19:03 lrineau File Added: abc_0_492.step
2021-10-22 19:04 lrineau File Added: abc_0_685.step
2021-10-22 19:04 lrineau File Added: abc_0_710.step
2021-10-22 19:04 lrineau File Added: abc_0_1005.step
2021-10-22 19:04 lrineau File Added: abc_0_1062.step
2021-10-22 19:06 lrineau Note Added: 0104802
2021-10-22 19:13 lrineau Note Added: 0104803
2021-10-24 10:23 git Note Added: 0104827
2021-10-25 11:00 ifv File Added: bug32557_1.brep
2021-10-25 11:01 ifv File Added: bug32557_2.brep
2021-10-25 11:18 git Note Added: 0104850
2021-10-26 14:08 ifv Note Added: 0104876
2021-10-26 14:08 ifv Assigned To ifv => msv
2021-10-26 14:08 ifv Status assigned => resolved
2021-10-26 17:30 msv Note Added: 0104883
2021-10-26 17:31 msv Assigned To msv => ifv
2021-10-26 17:31 msv Status resolved => assigned
2021-10-26 17:58 ifv Note Added: 0104884
2021-10-26 17:58 ifv Assigned To ifv => msv
2021-10-26 17:58 ifv Status assigned => resolved
2021-10-26 18:37 msv Note Added: 0104885
2021-10-26 18:37 msv Assigned To msv => bugmaster
2021-10-26 18:37 msv Status resolved => reviewed
2021-10-28 10:27 ifv Note Added: 0104930
2021-10-30 11:21 smoskvin Note Added: 0104978
2021-10-30 11:21 smoskvin Status reviewed => tested
2021-11-02 17:57 ifv Changeset attached => occt master 9923f087
2021-11-02 17:57 ifv Assigned To bugmaster => ifv
2021-11-02 17:57 ifv Status tested => verified
2021-11-02 21:09 git Note Added: 0105021
2021-11-02 21:09 git Note Added: 0105022
2021-12-30 15:09 szy Target Version 7.6.0 => 7.7.0