View Issue Details

Jump to NotesJump to History
IDProjectCategoryView StatusDate SubmittedLast Update
0025902Open CASCADEOCCT:Modeling Algorithmspublic2015-03-06 13:062021-08-29 18:51
Reporterapn Assigned Tojgv  
PrioritynormalSeverityminor 
Status assignedResolutionopen 
Target Version7.7.0 
Summary0025902: Unclear behavior of command featperform
DescriptionTest case feat/featprism/C4 contains commands:
...
featprism cyl cont cont 0 1 0 0 1
featperform prism result face face
...
Featperform builds prism and then cuts it from cylinder. Point for cutting is cylindrical face (source face).
In current state of master empty compound is built and operation cut isn't done.
In version CR671-FINAL1 it works correctly, cutting is done.
Steps To Reproducerun feat featprism C4 on current state of master
TagsNo tags attached.
Test case numberfeat featprism C4

Activities

apn

2015-03-06 13:06

administrator   ~0038178

Last edited: 2015-03-06 13:30

 Result on CR671-FINAL1:
http://occt-tests/CR671-FINAL1-CR671-FINAL1-occt/Windows-32-VC9/feat/featprism/C4.html

msv

2015-03-10 10:30

developer   ~0038218

Dear jgv, please take care of this bug.

Issue History

Date Modified Username Field Change
2015-03-06 13:06 apn New Issue
2015-03-06 13:06 apn Assigned To => msv
2015-03-06 13:06 apn Note Added: 0038178
2015-03-06 13:07 apn Test case number => feat featprism C4
2015-03-06 13:30 apn Note Edited: 0038178
2015-03-10 10:30 msv Note Added: 0038218
2015-03-10 10:30 msv Assigned To msv => jgv
2015-03-10 10:30 msv Status new => assigned
2015-04-14 10:02 msv Target Version 6.9.0 => 7.1.0
2016-10-28 15:33 msv Target Version 7.1.0 => 7.2.0
2017-07-24 09:32 msv Target Version 7.2.0 => 7.3.0
2017-12-05 17:08 msv Target Version 7.3.0 => 7.4.0
2019-08-12 16:45 msv Target Version 7.4.0 => 7.5.0
2020-09-14 22:54 msv Target Version 7.5.0 => 7.6.0
2021-08-29 18:51 msv Target Version 7.6.0 => 7.7.0