MantisBT - Open CASCADE
View Issue Details
0025513Open CASCADE[OCCT] OCCT:Data Exchangepublic2014-11-24 15:302020-09-17 20:22
skl 
skl 
normalminor 
assignedopen 
[OCCT] 6.8.0 
[OCCT] 7.6.0* 
0025513: Choose of projector during import operation
It is needed to implement a possibility of changing of used projector for creation 2D curves from 3D curves during process of import data. This selection must be managed by parameter “read.projector.mode” in DRAW command <param>. This parameter must have two value – “Standard” and “DE”(Data Exchange).

No tags attached.
? Tank8.igs (98,236) 2014-11-24 17:25
https://tracker.dev.opencascade.org/
Issue History
2014-11-24 15:30sklNew Issue
2014-11-24 15:30sklAssigned To => gka
2014-11-24 15:41abvNote Added: 0034639
2014-11-24 15:41abvAssigned Togka => skl
2014-11-24 15:41abvStatusnew => feedback
2014-11-24 15:59sklNote Added: 0034643
2014-11-24 16:02gkaStatusfeedback => assigned
2014-11-24 16:04abvNote Added: 0034646
2014-11-24 17:25sklFile Added: Tank8.igs
2015-12-15 14:06abvTarget Version7.0.0 => 7.1.0
2016-10-26 19:58gkaTarget Version7.1.0 => 7.2.0
2017-07-27 09:33abvTarget Version7.2.0 => 7.4.0
2019-09-04 12:58abvTarget Version7.4.0 => 7.5.0
2020-09-17 20:22gkaTarget Version7.5.0 => 7.6.0*

Notes
(0034639)
abv   
2014-11-24 15:41   
Please explain why it is needed
(0034643)
skl   
2014-11-24 15:59   
It is needed because there is a real case where DE projector (used in current implementation) can not get a good result.
(0034646)
abv   
2014-11-24 16:04   
Well, please attach then this case as example to reproduce the problem :)